Nortec HumDigital - Manual (Page 4)

Created: 04.06.2007
4
Changed: 21.12.2007
Printed: 02.03.2009
The menu mode can be called up using the enter key. The separate menu
points can be called up with the arrow keys.
Each menu has an “EXIT” point
to return to the next higher menu.
If the key lock is enabled, the code must be entered first to access the menu.
The entire menu level is shown in the illustration below. In the following, the
separate menus will be described in greater detail.
1.1 FOG menu
In the FOG menu, the following settings can be made:
standard parameter
*FOG
target %RH
SETPT
Hysteresis
HYST
exit submenu
EXIT
display controls
*DISP
backlighting.
BGL ON
units °C / °F
UNIT T
if keylocked:
CODE?
LCD display
LCD OUT
Measur. mode
activation
LOCK
exit submenu
EXIT
set code
CODE
keylock code
*KEYLO
exit submenu
EXIT
ACTIVE
INACTIVE
Standby function for
FOGING
2 sec.
Falls
Code = 0
std parameterr
*FOG
target %RH
SETPT
Hysteresis
HYS
T
exit submenu
EXIT
Standby function for
FOGGING