Nortec HumDigital - Manual (Page 15)

Created: 04.06.2007
15
Changed: 21.12.2007
Printed: 02.03.2009
Status for LS3400 (SYN)
Display Priority* Description
ERR 1 Error (M200 –M205), com error
Mntc 2 Maintenance (M234)
FWA 3 Circulation (M235)
ON 4 In operation
* When two status reports occur at once, that with lower priority is shown.
Info on LS3400 (SYN)
Display Priority* Description
Com err 1 Communication error
Cap err M 2 Capability error: CenterPur cannot fulfil the function required.
Causes: Firmware not updated, device technology outdated
Cap err D 3 Capability error: LS cannot fulfil the function required.
Causes: Firmware not updated, device technology outdated
Safety press. err 7 Safety pressure error (M200)
Inlet press. err 9 Inlet pressure error (M201)
Gas press. err 8 Gas pressure error (M202)
Motor prot. err 6 Motor protection error (M203)
Synthesis err 5 Synthesis error (M204)
Product err 4 Product error (M205)
Mntc Syn 10 Maintenance (M234)
SynPur ready 11 PER ready for operation
* When two status reports occur at once, that with lower priority is shown.
Parameters for HPS 3200 (HIG)
Name Function Notes
Dtype: Device type HPS3200 (M261, M262, M263, D250)
DNum: Device number (D250,D251)
Stat: Summary of status See table below
Info: Additional status information See table below
Status for HPS 3200 (HIG)
Display Priority* Description
ERR 1 Error (M200 –M204), com error
ON 2 Pump running (M232)
Stdby 3 No malfunction, pump off
* When two status reports occur at once, that with lower priority is shown.