Nortec HumDigital - Manual (Page 13)

Created: 04.06.2007
13
Changed: 21.12.2007
Printed: 02.03.2009
2.2.2 Status menu
Select a unit with the UP/DOWN keys and display the detailed status with the
“STAT” softkey.
## STATUS HIG #1 d
Dtype: HPS3200
DNum: 4294967296
Stat: ON
Info: HighPur ready
Parameters for CSF3121 (PER)
Name Function Notes
Dtype: Device type CSF3121 (M261,M262, M263, D250)
DNum: Device number (D250,D251)
Stat: Summary of status See table below
Info: Additional status information See table below
Status of CSF3121 (PER)
Display Priority* Description
ERR 1 Error (M201, M236, M250, M251), com error
Full 2 Tank full (M235)
ON 3 In operation
* When two status reports occur at once, that with lower priority is shown.
Info on CSF3121 (PER)
Display Priority* Description
Com err 1 Communication error
Cap err 2 Capability error: CSF cannot fulfil the function required.
Causes: Firmware not updated, device technology outdated
Safety press. err 3 Safety pressure error (M201)
Inlet press. err 5 Inlet pressure error (M236)
Conductivity err 6 Conductivity error (M250)
Motor prot. err 4 Motor protection error (M251)
PerPur ready 7 PER ready for operation
* When two status reports occur at once, that with lower priority is shown.