Built in radio performance, Connector assignments, Input/output data messages – NavCom RT-3010 Rev.E User Manual

Page 45

RT-3010 User Guide - Rev. E

Built in Radio Performance

• Frequency Band:

2.400GHz - 2.485GHz

• Modulation:

Frequency Hopping
Spread Spectrum ¿

• Data Rate:

9600bps (configurable)

• Transmit Power:

1-Watt max

• Receiver Sensitivity:

-105dBm

• Range @ Max. Power:

10km Line of Sight

• Maximum EIRP:

6dBW***

• Optional Pole-Mount Antenna:

3db gain

*** Using high gain antenna
¿EIRP and hopping bandwidth restrictions vary
depending on local regions. Contact NavCom
Technology, Inc. for regulations in your local area.

Connector Assignments

•Data Interfaces:

2 serial ports; 1200 bps to 115.2 kbps

Input/Output Data Messages

• NCT Proprietary Data:

PVT

Raw Measurement
Satellite Messages

Nav Quality

Receiver Commands

• NMEA Messages

ALM, GGA, GLL, GSA,

(Output Only):

GSV, RMC, VTG, ZDA, GST

Proprietary

NMEA

Type

SET

(Output Only)

• Code Corrections:

RTCM 1 or 9
WAAS/EGNOS

A-43

This manual is related to the following products:

RT-3010 Rev.D RT-3010 Rev.A SF-2040 Rev.B SF-2040 Rev.A SF-2040 Rev.C SF-2040 Rev.D SF-2040 Rev.E RT-3010 Rev.B RT-3010 Rev.C