NavCom RT-3010 Rev.E User Manual

Page 30

Text mode
Original mode

RT-3010 User Guide - Rev. E

occur. The

SSR

integrated into the RT-3010 has a line of

sight range up to a maximum of 10km.

When setting up the reference sensor, it is best to have
the

reference station

sensor elevated above the roving

sensors since radio signals of such high frequency tend
to travel a shorter distance than their lower frequency
counterparts, and are apt not to penetrate obstructions
as well over distance. This also affords the reference
sensor to transmit to all

rove s

in all directions with

minimal obstruction. Figure 7 & 8 illustrates a proper
and improper

RTK

reference station

installation.

Figure 7: Good Line of Sight

RTK

setup

Figure 8: Poor Line of Sight

RTK

setup

3-28

This manual is related to the following products:

RT-3010 Rev.D RT-3010 Rev.A SF-2040 Rev.B SF-2040 Rev.A SF-2040 Rev.C SF-2040 Rev.D SF-2040 Rev.E RT-3010 Rev.B RT-3010 Rev.C