Chapter 5 safety instructions, Fcc notice, Transport – NavCom RT-3010 Rev.E User Manual
Page 35: Rf exposure compliance, Chapter 5, Safety instructions
RT-3010 User Guide - Rev. E
Chapter 5
Safety Instructions
The RT-3010
GPS
sensor is designed for precise
navigation and positioning using the
Global
Positioning System
. Users must be familiar with the use
of portable
GPS
equipment, the limitations thereof and
these safety instructions prior to use of this equipment.
FCC Notice
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Transport
The NavCom equipment should always be carried in its
case. The case must be secured whilst in transit to
minimize shock and vibration.
All original packaging should be used when
transporting via rail, ship, or air.
RF Exposure Compliance
The RT-3010 complies with the FCC exposure limits.
Users and bystanders are required to be a minimum of
20 cm away from the
SSR
transmitting antenna when
used in the basic configuration. If transmitting system is
modified from basic setup, check FCC regulations for
compliance with exposure limits.
5-33