NavCom RT-3010 Rev.E - Manual (Page 17)

RT-3010 User Guide - Rev. E
Communication Ports
The RT-3010 GPS sensor is fitted with two 7-pin female
LEMO connector communication ports located at the
bottom of the Indicator Panel labeled COM 1 and
COM 2 as shown in Figure 2. Each conforms to the EIA
RS232 standard with data speeds between 1200 bps
and 115.2 kbps . The pin-outs for these connectors are
described in Table 2. An interface data cable ( P/N 94-
310090-3003) is supplied with the RT-3010 for easy
startup. The cable construction is described in Figure 3.
LEMO
Pins
Signal Nomenclature
[ DCE w/respect to DB9S ]
DB9S
Pins
1 CTS__Clear To Send 8
2 RD___Receive Data 2
3 TD___Transmit Data 3
4 DTR__Data Terminal Ready 4
5 RTN__Return [Ground] 5
6 DSR__Data Set Ready 6
7 RTS__Request To Send 7
Table 2: Serial Cable Pin-Outs
2-15