NavCom RT-3010 Rev.E - Manual (Page 20)

RT-3010 User Guide - Rev. E
„
Link LEDs
Table 3: Link Light Indication
LINK Status
Command Mode
Rapidly repeating Red to Amber to Green
indicates Searching for base radio signal.
Strong Signal Strength from the base radio.
Medium Signal Strength from base radio.
Weak Signal Strength from base radio.
‡
The Link lights are software configurable via the
appropriate NavCom proprietary command . Because of
the numerous scenarios available for the Link light, only
the factory default configuration [
Rover Mode] is
discussed.
„
Base LEDs
If the RT-3010 has been configured as a Base Station,
the
LED s indicate the type of RTK corrections being
produced. Where the color of the LED will indicate the
format of the correction, the blink rate indicates
specifically which message is being sent. Table 4
illustrates the color, format, message, and blink rate of
the
LED s for the type of corrections being output.
2-18