NavCom RT-3010 Rev.E - Manual (Page 21)

RT-3010 User Guide - Rev. E
Table 4: Base station Indication
„
GPS LEDs
BASE Status Blink Rate
Rover mode N/A
NCT Proprietary 1Hz
CMR 1Hz
RTCM 20,21=5Hz; 18,19=1Hz
GPS Status
Power is off.
Power is on, No satellites tracked.
Tracking satellites, position not available yet.
Non-differential positioning.
Code based differential positioning.
Dual frequency Phase positioning.
Table 5: GPS Light Indication
‡ The GPS LED s will blink at the PVT positioning rate
selected.
2-19