NavCom RT-3010 Rev.E - Manual (Page 14)

RT-3010 User Guide - Rev. E
Chapter 2 Interfacing
This chapter details the RT-3010 GPS sensor
connectors and status display appropriate sources of
electrical power, and how to interface with
communication ports.
Electrical Power
Electrical power is input thru a 4-pin LEMO female
connector located on the front panel of the RT-3010,
and labeled ‘DC PWR.’ The pin designations are shown
in Table 1; see Figure 2 for pin rotation on unit.
Pin Description
1
2
Return
3
4
Power Input 10 to 30 VDC
Table 1: External Power Cable Pin-Out
‡
Pins 1 and 2 are connected together inside the RT-3010
GPS sensor. Pins 3 and 4 are connected together inside
the GPS sensor.
2-12