MMD Equipment 185S-6C2 - Manual (Page 51)

5.Periodic Inspection/Maintenance
5-18
5.5.29 Check and confirm that the nuts with which tires are fixed are properly
tightened.
[ Every 3 months ]
 Check and confirm once every three months
that hub nuts with which tires are fixed
are not loosend. (8 points)
 If it is found that specified tightening torque
of clamped bolts drops to a lesser value,
retighten them to correct specified value.
[Standard pressure for a tire is at
65psi(4.5bar)]
A100217
Hub nuts
Tightening torque：100 lb・ft
Tire pressure 65psi(4.5bar)