MMD Equipment 185S-6C2 - Manual (Page 45)

5.Periodic Inspection/Maintenance
5-12
5.5.14 Supply grease to trailer hub bearing
[Every 1,000 hours]
 Call your nearest dealer for replenishing grease to the trailer
hub bearing.
Grease: Chassis grease
5.5.15 Supply grease to each part of trailer
[Every 1,000 hours]
 Supply grease through grease nipples positioned at the
bottom.
Grease: Chassis grease
5.5.16 Change coolant
[1,000 hours or every 2 years]

Be sure to stop the machine and allow time to cool. Then
loosen the radiator cap one notch. After the coolant water
is sufficiently cooled and the inner pressure is released,
take the cap off.
If this procedure is neglected, the inner pressure can blow
off the cap. Steam jetting out of the radiator could result in
causing scalding. Follow this procedure under all
circumstances.

LLC (Antifreeze) is a toxic material.
 When a person has drunk LLC (Antifreeze) by accident, make him vomit and see a doctor
immediately.
 When a person gets LLC (Antifreeze) in his eyes, wash the eyes with clean running water and
make him see a doctor immediately.
 When LLC (Antifreeze) is stored, put it in a container with an indication saying “LLC (Antifreeze)
inside” and seal it up, then keep it in a place away from children.
Beware of flames.
TR0260B
TR0260-1
Bearing
Grease Hub
Caution in filling or discharging engine oil
H990432