Part names, 1 internal components and part names – MMD Equipment 185S-6C2 User Manual

Page 15

2.Part Names

2-1

2.1 Internal Components and Part Names

7 8 9 10 11 12

No. Description

Function

Oil separator

For separating oil mist mixed in compressed air.

Pressure control

For keeping the separator receiver tank pressure higher than 58psi (4bar) in the tank.

3 Safety

valve

For releasing compressed air to the atmosphere when the pressure rises

higher than the rated pressure.

Air filter

(For Compressor air-end )

For filtering the dust floating in the intake air.

5 Speed

regulator

For regulating air-end revolution speed.

Air filter (For engine) For filtering the dust floating in the intake air.

Air bleeding electro-

magnetic pump

For automatically bleeding air from fuel pipes.

8 Fuel

filter

For filtering dust and foreign matter mixed or to be mixed in the

fuel oil.

9 Fuel

tank

For storing diesel fuel oil.

10 Engine oil filler port

For supplying and replenishing engine oil to engine.

11 Reserve tank

For checking engine cooling water level and for replenishing cooling water.

12 Radiator

For cooling the coolant for engine because it is water-cooled.

13 Sedimenter

For separating water mixed or to be mixed in the fuel oil.

14 Engine oil filter

For filtering engine oil.

15 Engine oil level gauge For checking engine oil level.

Solenoid valve for

starting unloader

Control device for reduction of power under unloaded operation.

17 Fuel tank drain valve For draining condensate accumulated in fuel tank.
18 Pressure

regulator

For regulating intake air volume.

19 Battery

For electrically starting engine.

19 18 17 16 15 14 13

A100441

1 2 3 4 5 6