MMD Equipment 185S-6C2 - Manual (Page 47)

5.Periodic Inspection/Maintenance
5-14
5.5.19 Change oil separator
[Every 2,000 hours]

When changing the oil separator, both cover and element must be replaced with new ones.
 Even before the periodic interval time of replacement, replace the oil separator whenever the oil
consumption increases and also oil is found mixed in the discharge air.
 When consumption of the oil is still unusual even after cleaning strainer in the scavenging orifice
(See 5.5.7)
, change the oil separator with a new one.
(For Replacement parts, See 5.4)
 When replacing oil separator, contact directly us or distributor because it requires expert technical
knowledge.
5.5.20 Change pressure regulator
[Every 3,000 hours]
 Remove pressure regulator and rebuild or replace with a new unit. (For part number, see 5.4)
Separator
casing
Element
Cover
Oil
separator
Separator cover
A100371
O-ring
A100463-1