MMD Equipment 185S-6C2 - Manual (Page 37)

5.Periodic Inspection/Maintenance
5-4
◎Refer to engine operation manual for inspection and maintenance of an engine.
(Unit:Hour)
Maintenance Daily
Every
50
Every
250
Every
500
Every
1,000
Every
2,000
Every
3,000
Page
Drain fuel tank. ○ 4-7
Check sedimenter for condensate. ○ 4-7
Check fuel. ○ 4-6
Check engine oil level. ○ 4-4
Check coolant level. ○ 4-5
Check looseness in pipe connectors, terminals
and tear in wiring.
○ 4-7
Check belt tension. ○ 4-8
Change engine oil.
○
First time
○ 5-6
Change engine oil filter.
○
First time
○ 5-6
Check battery electrolyte. ○ 5-7
Clean and change air-filter element.
○
(Clean)
○
(Change)
5-7
Clean of element in sedimenter. ○ 5-10
Change fuel filter. ○ 5-10
Change coolant. ☆○ 5-12
Clean outside of radiator. ○ 5-11
Clean inside of radiator. ● 5-11
Change fuel hose. ☆● 5-13
Clean inside of fuel tank. ●
En
gi
ne
Change radiator hoses. ★● 5-15
The items or parts marked ☆ should be replaced every 2 years even if they are not in disorder within their
periodical maintenance interval because their materials will change or become degraded as time passes.
Also for the same reason, the parts marked ★ should be replaced every 3 years.
Maintenance Daily
Every
250
Every
300
Every
500
Every
1,000
Every
2,000
Every
3,000
Page
Supply grease to trailer hub bearing. ○ 5-12
Supply grease to reif spring pin. ○ 5-12
Check and confirm that drawbar is
properly fixed with bolts properly,
according to specified tightening torque.
○
Every
3 months
5-17
Check and confirm that the bolts with
which undercarriage brackets are fixed
are properly tightened.
○
Every
3 months
5-17
Underca
rria
ge
Check and confirm that the nuts with
which tires are fixed are properly
tightened.
○
Every
3 months
5-18