MK Products CobraMig 260 PS/Feeder - Manual (Page 15)

CobraMig 260 Owner's Manual - Page 9
PROCESS SETTINGS
The following table is provided as a guide to assist you in setting up for
standard welding processes. Please be aware that there are many variables
associated with welding and conditions can change from day to day due to
any number of external infl uences.
MK Products' Customer Service Department is ready to assist you should
you need help setting up your equipment in the fi eld. Please be aware that
we do not specialize in process parameter problems, but are willing to share
our resources if it might help you achieve better quality welds.
MK Products reserves the right to change any settings associated with this
welding guide, you may request the most up to date guide by calling our
Customer Service department during normal working hours.
To use chart, locate material, thickness and wire diameter. Then read across
for values to use, "REF" is the value dialed on the "Weld Voltage" knob on the
front panel, this is only a reference value.