Microsonic sks-15/CI - Manual (Page 2)

Technical data
blind zone
operating range
maximum range
angle of beam spread
20 mm
150 mm
250 mm
see detection zone
transducer frequency
resolution, sampling rate
reproducibility
detection zones
for different objects:
The dark grey areas are determined
with a thin round bar (10 mm dia.)
and indicate the typical operating range
of a sensor. In order to obtain the light grey
areas, a plate (100 x 100 mm) is introduced
into the beam spread from the side.
In doing so, the optimum angle between
plate and sensor is always employed.
This therefore indicates the maximum
detection zone of the sensor.
It is not possible to evaluate ultrasonic
reflections outside this area.
380 kHz
0,056 mm
± 0,15 %
accuracy
operating voltage U B
voltage ripple
±1% (temperature drift internally compensated)
15 - 30 V DC, reverse polarity protection
±10 %
no-load current consumption
housing
< 30 mA
ABS
ultrasonic transducer: polyurethane foam,
epoxy resin with glass content
class of protection to EN 60 529
norm conformity
type of connection
controls
IP 67
EN 60947-5-2
4-pin M8 initiator plug
Teach-in push-button
indicators
synchronisation
pulse width synchroniszation signal t i
LED green (operation)
LED yellow (object in the window)
external
> 150 µs
repetition rate synchronization signal t p
operating temperature
storage temperature
weight
8 ms < t p < 1 s
-25°C to +70°C
-40°C to +85°C
8 g
response time
time delay before availability
norm conformity
24 ms
< 300 ms
EN 60947-5-2
order no.
current output 4-20 mA
order no.
sks-15/CI
R
L ≤ 500 Ω, rising/falling characteristic
sks-15/CU
voltage output 0-10 V R L ≥ 100 kΩ, short circuit proof,
rising/falling characteristic
1 analogue output
1
2
4
3
+U B
-U B
Com
U
R L
U | I
sks-15...
8 cm 4 cm 0 cm 4 cm 8 cm
0 cm
4 cm
8 cm
12 cm
16 cm
20 cm
24 cm
Round bar
Plate
microsonic GmbH • Hauert 16 • D-44227 Dortmund • Tel: +49 2 31 / 97 51 51-0 • Fax: +49 2 31 / 97 51 51-51 • E-Mail: [email protected] • www.microsonic.de The content of this document is subject to technical changes. Specifications in this document are presented in a descriptive way only. They do not warrant any product features. *B7392*
MV-DO-142528-444239
89/336/EEC