Microsens MS400900M - Manual (Page 42)

24-Port PoE Injector User’s Manual Page 40/40
RJ-45 pin assignment of non-802.3af standard PD
with Mid-Spain POE INJECTOR RJ-45 pin assignment
Pin out of Cisco non-802.3af standard PD
Pin Signal
1 RX+
2 RX-
3 TX+
4 VCC -
5 VCC -
6 TX-
7 VCC +
8 VCC +
Pin out of POE Mid-Spain Injector
Pin Signal / Name
1 RX+
2 RX-
3 TX+
4 VCC+
5 VCC+
6 TX-
7 VCC-
8 VCC-
Before you powered PD, please check the RJ-45 connector pin assignment follow
IEEE802.3af standard, otherwise you may need change one of the RJ-45 connector
pin assignment, which attached with the UTP cable.
©2007 MICROSENS . MICROSENS reserves the right to make any changes without further notice to any product to improve reliability,
function or design. MICROSENS does not assume any liability arising out of the application or use of any product. FR 1707
MICROSENS GmbH & Co. KG · Kueferstraße 16 · 59067 Hamm / Germany · Tel. +49 23 81/94 52-0 · FAX -100 · www.microsens.com