Microsens MS400900M - Manual (Page 20)

24-Port PoE Injector User’s Manual Page 18/40
System Name: Displays the name of the injector.
System Description: Displays the description of the injector.
System Location: Displays the injector physical location.
Firmware Version: Displays the injector’s firmware version.
Kernel Version: Displays the kernel software version.
Hardware Version: Displays the hardware version
MAC Address: Displays the unique hardware address assigned by manufacturer
(default)
PoE Chip Version: Displays the chip version on main board.
POE Configure interface.
Console Port Information
Baud Rate(bps): Displays the transmission rate (bits per second).
Parity Check: Displays which parity check method is used.
Data Bits(bit): Displays the number of bits per unit of data.
Stop Bits(bit): Displays the number of bits for announcing the end of the data.
Flow Control: Displays the method of flow control.
Console Port Information interface
MICROSENS GmbH & Co. KG · Kueferstraße 16 · 59067 Hamm / Germany · Tel. +49 23 81/94 52-0 · FAX -100 · www.microsens.com