Microsens MS400900M - Manual (Page 11)

24-Port PoE Injector User’s Manual Page 9/40
Rear Panel
The 3-pronged power plug is located at the rear Panel of the 24-port
Power-over-Ethernet Injector as shown below. The Injector will work with AC in
the range 100-240V AC, 50-60Hz and also provides one DC 48V input for the extra
power connection support and one DC 48V internal power supply for the power
redundant function. The RS-232 DB-9 female connector on rear side is for UPS
management.
100~240V AC, 50/60Hz
DC 48V input
RS-232 DB-9 female
The Rear Panel of 24-port Power-over-Ethernet Injector
Power On
Connect the power cord to the power socket on the rear panel of the 24-Port
Power-over-Ethernet Injector. The other side of power cord connects to the power
outlet. The internal power supply of the 24-port Power-over-Ethernet Injector
works with voltage in the 100-240 VAC range, frequency 50~60Hz. Check the
power indicator on the front panel to see if power is properly supplied.
MICROSENS GmbH & Co. KG · Kueferstraße 16 · 59067 Hamm / Germany · Tel. +49 23 81/94 52-0 · FAX -100 · www.microsens.com