Microsens MS400900M - Manual (Page 17)

24-Port PoE Injector User’s Manual Page 15/40
Web-Based Management
This section introduces the configuration and functions of the Web-Based
management.
About Web-based Management
On CPU board of the injector there is an embedded HTML web site residing in flash
memory, which offers advanced management features and allow users to manage
the injector from anywhere on the network through a standard browser such as
Microsoft Internet Explorer.
The Web-Based Management supports Internet Explorer 5.0. And, it is applied for
Java Applets for reducing network bandwidth consumption, enhance access speed
and present an easy viewing screen.
[NOTE] By default, IE5.0 or later version does not allow Java Applets to activate
sockets. In fact, the user has to explicitly modify the browser setting to enable Java
Applets to operate network ports.
Preparing for Web Management
Before using web management, install the Injector on the network and make sure
that any one of the PCs on the network can connect with the Injector through the
web browser. The Injector default of IP, subnet mask, user name and password are
as follows:
IP Address: 192.168.16.1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.16.254
User Name: admin
Password: microsens
MICROSENS GmbH & Co. KG · Kueferstraße 16 · 59067 Hamm / Germany · Tel. +49 23 81/94 52-0 · FAX -100 · www.microsens.com