MicroE CET for MTE Series - Manual (Page 17)

Page 17
CET™ Scale, MTE Top Mount Configuration
Installation By Mounted Applicator Tool
11.
Apply the Tape Scale
Push the Applicator Tool and fixture assembly in the direction of tape application. Use a slow and steady motion.
Once the tool begins moving, it automatically separates the clear adhesive backing tape from the scale.
Pull the clear adhesive backing tape out of the way to prevent the backing tape from clogging the applicator tool.
Be sure to pull the
adhesive backing film out
of the way to prevent a
tool jam.
Pull clear adhesive backing
tape out the way as the
Applicator Tool is moved.
Applicator Tool and fixture direction of motion
CET Scale being applied
to mounting surface
Tool contact cylinder knob in the DOWN position