Microcom 412 - Manual (Page 99)

Appendix D Quick Reference Command Summary
412 Operators Manual 91
X 35 Contrast Window Adjust: This is the temporary contrast adjustment. The ^AX
is between 60 and 140%
1 60% of Base
2 70% of Base
3 80% of Base
4 90% of Base
5 100% of Base
6 110% of Base
7 120% of Base
8 130% of Base
9 140% of Base
XX 36 Adjust Contrast Base: Non-Volatile command. The ^AXX is between 10 and
200%. Section 5.3.
39 Auto-Size Label: Section 5.3.3.
0 Clears the use of auto-size values set by ^A1^D39.
1 Uses the values obtained for the variables instead of what the user supplies in
the header of the format file.
2 Automatically sizes the label and displays on the screen the values for the size
variables.
3 Same as ^A2^D39, but prints the values on a label, instead of on the screen.
5 Diagnostic Mode
40 Clear Commands 41-51.
XX 41 Load number of fields in layout (HFM): Preceded by ^A.
XX 42 Load label width in dots (LXS): Preceded by ^A.
XX 43 Load label height in dots (LSY): Preceded by ^A.
XX 44 Load web size in dots (WEB): Preceded by ^A.
XX 45 Load gap size in dots (GAP): Preceded by ^A.
XX 46 Load print speed (DPS): Preceded by ^A.
XX 47 Load label control byte (LCB): Preceded by ^A.
XX 48 Load number of steps to activate gap detector (AGD): Preceded by ^A.
XX 49 Load number of steps past gap (SPG): Preceded by ^A.
XX 50 Load X direction offset (OFX): Preceded by ^A.
XX 51 Load Y direction offset (OFY): Preceded by ^A.