Microcom 412 - Manual (Page 85)

Chapter 8 Bar Codes
412 Operators Manual 77
<---------------- UPC-A BAR CODE
<---------------- Human Readable
UPC-A Bar Code
Figure 13
Text conversion identifiers 28 and 29 are MSI human readables that do not border themselves
with bar lines like 32 and 33. Their purpose is only to add the calculated check digit(s) to text
lines. To design with these TCI's, select a text character generator number and multiply as with
any other text field. Place this field underneath the MSI bar code. TCI 3 works in this same way
but for UPC-A bar codes. All other bar code human readables only require a text TCI of 1, a
user selectable text character generator, and text positioning under the desired bar code. This
field must refer to the bar code number.
^D57
16,814,609
1,100,20,17,1,1
3,60,37,11,32,,,,2,2
3,82,55,11,12,,,,2,60
2,375,20,19,1,1
3,350,37,11,33,,,,2,2
3,372,55,11,12,,,,2,60
4,80,150,19,1,1
4,65,167,12,20,,,,2,60,,8
5,408,150,14,1,1
5,395,167,7,21,,,,2,60,,7
6,110,270,5,1,1
6,120,287,12,13,,,,2,60,,8
9,180,270,8,3,1
7,400,270,5,1,1
7,470,287,12,13,,,,2,60,,8
Bar Code Human Readables
8,460,270,8,3,1 Figure 14
^D56^D2
UPC-A HR W/CHKSUM
UPC-A HR W/O CHKSUM
01234567890
EAN13 012345678901
EAN8 0123456
UPC-E 00123400005
UPC-E 10123400005
^D3