Microcom 412 User Manual
Page 96
Quick Reference Command Summary
Appendix D
412 Operators Manual
88
^A
^D
Command
2
Text string entry mode: Precedes the text strings that are supplied to the
various fields in the label (Equivalent to ^B).
3
Print Command: Prints a single label or starts the printing of a batch of labels.
(Equivalent to ^C)
5
Send Printer Status: (Equivalent to ^E)
11
Print a Test Label: (Equivalent to ^K)
12
Print a Blank Label: (Equivalent to ^L)
20
Bits per Second: This command changes the serial port communications
speed. Speeds over 38400 bps will cause the printer to utilize flow control
during the print routine.
0
110 bps
1
150 bps
2
300 bps
3
600 bps
4
1200 bps
5
2400 bps
6
4800 bps
7
9600 bps
8
19200 bps
9
38400 bps
10
57600 bps
11
115200 bps
21
Change SW1: Software dip switch #1. A Non-Volatile command. Below is the
^AB sequence:
12345678
^ABxxxxxxxx
*******.Q
1=XON/XOFF Enable, 0=Disable
******.)Q
1=8 Data Bits, 0=7 Data Bits
*****.))Q
1=Echo Enable, 0=Disable
****.)))Q
1=No Parity, 0=Enable Parity
***.))))Q
1=Odd Parity, 0=Even Parity
**.)))))Q
1=Ignore Control Codes, 0=Accept
*.)))))))))),
.)))))))))),*
Enquiry Response
00 = Control Codes
10 = Text Equivalent
11 = ^ Equivalent