Microcom 412 - Manual (Page 81)

Chapter 8 Bar Codes
412 Operators Manual 73
The following table is a list of supported Application Identifiers and their data format
requirements. Use this legend when reading the data format requirements:
a alphabetic character
n numeric character
an alphanumeric character
a3 3 alphabetic characters, fixed length
n3 3 numeric characters, fixed length
an3 3 alphanumeric characters, fixed length
a..3 variable length up to 3 alphabetic characters
n..3 variable length up to 3 numeric characters
an..3 variable length up to 3 alphanumeric characters
AI Content Format
00 SSCC-18 n2+n18
01 SCC-14 n2+n14
10 Batch or Lot Number n2+an..20
11(*) Production Date (YYMMDD) n2+n6
13(*) Packaging Date (YYMMDD) n2+n6
15(*) Sell By Date (Quality) (YYMMDD) n2+n6
17(*) Expiration Date (Safety) (YYMMDD) n2+n6
20 Product Variant n2+n2
21 Serial Number n2+an..20
22 HIBCC - Quantity, Date, Batch and Link n2+an..29
23(**) Lot Number (Transitional Use) n3+n..19
240 Additional Product Identification assigned by the Manufacturer n3+an..30
250 Secondary Serial Number n3+an..30
30 Quantity n2+n..8
310(***) Net Weight, Kilograms n4+n6
311(***) Length or 1st Dimension, Meters n4+n6
312(***) Width, Diameter or 2nd Dimension, Meters n4+n6
313(***) Depth, Thickness, Height or 3rd Dimension, Meters n4+n6
314(***) Area, Square Meters n4+n6
315(***) Volume, Liters n4+n6
316(***) Volume, Cubic Meters n4+n6
320(***) Net Weight, Pounds n4+n6
321(***) Length or 1st Dimension, Inches n4+n6
322(***) Length or 1st Dimension, Feet n4+n6
323(***) Length or 1st Dimension, Yards n4+n6
324(***) Width, Diameter, or 2nd Dimension, Inches n4+n6
325(***) Width, Diameter, or 2nd Dimension, Feet n4+n6
326(***) Width, Diameter, or 2nd Dimension, Yards n4+n6
327(***) Depth, Thickness, Height or 3rd Dimension, Inches n4+n6
328(***) Depth, Thickness, Height or 3rd Dimension, Feet n4+n6
329(***) Depth, Thickness, Height or 3rd Dimension, Yards n4+n6
330(***) Gross Weight, Kilograms n4+n6
331(***) Length or 1st Dimension, Meters, Logistics n4+n6
332(***) Width, Diameter or 2nd Dimension, Meters, Logistics n4+n6
333(***) Depth, Thickness, Height or 3rd Dimension, Meters, Logistics n4+n6
334(***) Area, Square Meters, Logistics n4+n6