Microcom 412 - Manual (Page 27)

Chapter 4 Designing Labels Using LDS
412 Operators Manual 19
(See Figure 6)
^D57
5,812,1218,,20,35
1,250,1068,8,1,5,,,2,2
2,200,900,11,1,5,,,2,2
3,175,760,26,1,5
4,295,560,11,1,5
4,110,50,11,16,3,,,3,406
^D56
^D2
Microcom
Corporation
Thermal Printing Solutions
01234567890
^D3 A label format is coming
Header information
Field #1 information
Field #2 information
Field #3 information
Field #4 information
Field #5 information
Select RAM Format
Text Data is Coming
Text String #1
Text String #2
Text String #3
Text String #4
Print Label 1
The sequence ^D57 puts the printer in format entry mode.
The next line is the header information: sizing the label (812 dots wide 1218 dots high).
The next five lines are layout information for each data field in the format.
The sequence ^D56 selects the user layout.
The sequence ^D2 tells the printer to start accepting data for each defined field. (Field #1 defines
where Data #1 should be positioned.) (Note: The label prints from bottom to top.)
The next three lines are data for each field.
Text string #4 is accessed twice. The format will print '01234567890' and then the bar code
equivalent.
The sequence ^D3 starts the print cycle. (Default is one copy. See section 5.3.2)