Meinberg VP100 20NET - Manual (Page 4)

Page 4 of 25 VP100/20NET
1. INTRODUCTION
The VP100/20 NET display is designed for displaying time and messages.
The time is displayed in the following format: day of the week, day of the month, month, hours,
minutes, and seconds. The messages can be displayed in the static, blinking or scrolling form. On
the display, up to 20 characters can be displayed simultaneously.
The display can be connected to a network through its Ethernet RJ-45 connector, through which the
programming of messages and the time synchronization with the NTP server are executed. The
messages are programmed on a personal computer which is connected to the network and on which
the Message Editor program is installed (the program is enclosed in the package).
Fig. 1: Front view.