Meinberg VP100 20NET - Manual (Page 19)

VP100/20NET Page 19 of 25
Example:
A sender wants a scrolling message with a beep and 3 occurrences. The e-
mail’s subject should,
according to the settings shown on the figure above, include: +l, +b, +n3 and (depending on the
settings) additional +d. The subject is for example: »A message to display +d +l +b +n3«.
If the option »Always use following display mode« is chosen, all the received messages are shown in
the way, which is set fixed. In this case all proper fields are
marked and in the field »Repeat« the
number of occurrences is given.
Displays
In order to establish communication with a display, the display should be added to a list in this
submenu.
In this submenu also some other settings can be adjusted. Each of the displays can also be removed
from the list.
When adding displays in the program there are two possibilities how to do it:

manually or

automatically.
Each display can be man ually added by clicking the button »Add Display«. Accordingly, all the
network parameters, serial number and name should be set manually. This option is useful especially
when dealing with older versions of the displays, which do not support an automatic search.