Meinberg VP100 20NET - Manual (Page 16)

Page 16 of 25 VP100/20NET
4.5 Description of menus
4.5.1 Options menu
Delete All Messages
This command deletes all messages from the chosen display.
Send All Messages
This command sends to the selected display all the messages entered through the PC.
Request Messages
As a result of this command, the chosen display will send to the PC all the active messages stored in
its memory.
Copy
With this command, you can transfer all the messages from one display to another. In the process of
copying, all the messages stored in the target display are completely overridden. For example, if you
wish to transfer the messages from Display A to Display B, first select Display A, then select Display
B, and finally execute the Copy command.
Settings
It is possible to set/change three types of parameters: those of the program, those of the display, and
those of the messages received via e-mail.