Meinberg VP100 20NET - Manual (Page 18)

Page 18 of 25 VP100/20NET
»Display Sender's E-Mail Address« is checked, the sender's address will also be shown on the
display, in front of the message itself.
In the menu »Display« there is an option to choose which emails are shown: either all, or those which
in include »+d« in the subject.
In the submenu »Mail display mode« it is set which and how emails are shown. The choice of how
the emails are shown
is up to the sender by setting »Read display mode from subject«. The other
possibility is to set this option in the program for all emails by choosing “Always use following display
mode ”.
Message Repetition Mode
If the option »Repeat message until confirmed« is chosen, the received email is occurring until the
user confirms
the reception by clicking the »Confirm email« button. The number of occurrences can
be limited: either through Message Editor or by the email subject.
Message Display Mode
If the choice is left
to the sender, the option »Read display mode from subject« should be set.
The email subject should include proper strings, which correspond to those set in the Message
Editor. The following parameters can be set:

scrolling message (Scrolling), default: +l,

beep when an email occurs (Beep), default: +b

beep and switching of built-in relay (Sound ON), default: +s

number of email occurrences (Repeat), default: +n; in the subject a number should be given
along with the defined string, e.g. +n5 for 5 occurrences.