Measurement Computing 2000 Series Daqboar - Manual (Page 16)

IG-6 DaqBoard/2000 Series Installation Guide 10-17-02 1033-0940, rev 6.0
Using “Add Device”
This method is for users who have accessed the Daq Configuration
control panel applet, but have no DaqBoard2K icon (as described on
page 3, step 2).
(A) After accessing the Daq Configuration control panel applet, click on
the Add Device button (see figure, right). The Select Device Type
window will appear.
(B) Using the Device Type’s pull-down list, select the applicable board.
In the example at the right DaqBoard/2000 is selected.
(C) Click the OK button. The DaqBoard/2000 Properties tab will appear.
This tab applies to all boards in the DaqBoard/2000 Series.
At this point, complete steps 3 through 5 from page 3.
Using “Add Device”
Step 4 – Test Hardware
Use the following steps to test the DaqBoard/2000 Series board. Note that these steps are continued from those listed under
the previous section, “Configure Board.”
1. Select the “Test Hardware” tab.
2. Click the “Resource Test” button.
3. After the test is complete, click “OK.”
System capability is now tested for the DaqBoard/2000
Series board and a list of test results appears on screen.
Note: If you experience difficulties, please consult your user
documentation (included on your CD) before calling for
technical support. Note that the user documentation
includes a troubleshooting chapter, as well as a great
deal of information regarding specific DBK cards and
modules.
Test Hardware Tab
(Condensed Screen Image)
At this point we are ready to connect signals. This is typically accomplished with the use of a DBK200 Series option.
Reference Note:
For detailed information regarding the DBK200 Series options, refer to the DBK Option Cards and Modules
User’s Manual (p/n 457-0905).
During software installation, Adobe ® PDF versions of user manuals are automatically installed onto your hard
drive as a part of product support. The default location is in the Programs directory, which can be accessed
from the Windows Desktop. A copy of the Adobe Acrobat Reader
® is included on your CD. The Reader
provides a means of reading and printing the PDF documents. Note that hardcopy versions of manuals can be
ordered from the factory.