Measurement Computing DaqView for DaqTemp Applications - Manual (Page 16)

DaqView, pg. 14 967996 DaqTemp Applications
Properties of Meter Windows
The meter windows simulate the look of 3 popular meter types: the bar graph, the analog dial, and the
digital readout. Within each meter type, you can adjust their display properties to fit your needs. While in
the meter window, place the cursor in the display area and click the right mouse button; then select
Properties. A Properties window will appear and allow you to:
• Scale - set the high and low points and the format (number of decimal places)
• Limits - set the high and low points and whether to display these limits
• Misc - set option to show the Trend Indicator and/or the Peak Hold Indicators.
Analog Output Window
The analog output window provides interactive access to the analog outputs on the “A” series DaqTemps.
DaqTemp7A has two DAC channels (DAC0 and DAC1); DaqTemp14A has four DAC channels (DAC0,
DAC1, DAC2, and DAC3).
When set to the default internal reference, these outputs can be set from 0 to +10 VDC.
The output voltage can be with the slide control, or by placing the cursor in the numeric field and entering a
valid voltage value. Selecting the Execute button sends the voltage values to the outputs.
The window is not available when the arbitrary waveform window is visible.
Analog Output Window