Measurement Computing USB-7202 - Manual (Page 6)

6
Chapter 1
Introducing the USB-7202
The USB-7202 is a USB 2.0 full-speed device that provides the following features:
 Eight channels of 16-bit analog input
o 100 kS/s max total throughput (200 kS/s with BURSTIO enabled), 50 kS/s on any one channel
o Simultaneous sampling (1 A/D converter per input)
o Independently configurable input ranges
 Eight individually configurable digital I/O channels
 32-bit event counter
 Digital trigger input
 Bidirectional SYNC pin for external clocking and synchronization with another board
 USB/104 form factor
 Stackable 3.55" x 3.75" board dimensions
The USB-7202 device is compatible with both USB 1.1 and USB 2.0 ports. The speed of the device may be
limited when using a USB 1.1 port due to the difference in transfer rates on the USB 1.1 versions of the
protocol (low-speed and full-speed).
The USB-7202 is powered by the +5 volt USB supply from your computer; no external power is required. The
device is compatible with both USB 1.1 and USB 2.0 ports. A USB cable is shipped with the device.
Caution! There are no product safety, electromagnetic compatibility (EMC), or CE marking compliance
claims made for the USB-7202. The USB-7202 is intended for use as a component of a larger
system. MCC can help developers meet their compliance requirements. The end product supplier,
however, is responsible for conforming to any and all compliance requirements.