Measurement Computing USB-7202 - Manual (Page 25)

USB-7202 User's Guide Specifications
25
OEM connector and pinout (P4)
Table 18. OEM connector specifications
Parameter Specification
Connector type 10 position 2.54 mm (0.1 in.) box header
Table 19. OEM connector pinout
Pin Signal Name Pin Signal Name
1 N/C 2 VBUS (fuse protected)
3 N/C 4 D–
5 N/C (do not connect anything to this pin) 6 D+
7 N/C (do not connect anything to this pin) 8 GND
9 N/C (do not connect anything to this pin) 10 SHIELD
Trigger/Sync connector and pinout (P5)
Table 20. Trigger/Sync connector specifications
Parameter Specification
Connector type 10 position 2.54 mm (0.1 in.) box header
Table 21. Trigger/Sync connector pinout
Pin Signal Name Pin Signal Name
1 TRIG_IN 2 GND
3 N/C 4 GND
5 SYNC 6 GND
7 N/C 8 GND
9 N/C 10 N/C