Measurement Computing DASYLab User Manual - Manual (Page 33)

Chapter 3 Visualizing Measurements
3-4 | dasylab.com
horizontally: Press and the left mouse button to move the curves
vertically, and press and the left mouse button to move the curves in
both directions. In horizontal direction you zoom and move all curves in all
axis systems because the curves all refer to a mutual x-axis. In vertical
direction you zoom and move curves only in the selected axis system. Use
the buttons on the toolbar to shift the curves in all axis systems step by step
in order to review already acquired data.
In the freeze mode you also can measure the curves. To do so, select Cursor
Mode from the context menu of the display window. The diagram displays
two movable cursor lines in all axis systems. In Figure 3-1 the legend
displays the values of the individual curves below the cursor lines. As soon
as the measurement restarts, the cursor lines disappear.
Figure 3-1. Measuring the Curves in the Diagram in Freeze Mode
Chart Recorder
Use the chart recorder to display data channels as curves in 2D axis systems
over time. The chart recorder plots the curve from right to left and is suitable
for recording slow long-term measurement data that has low sampling rates.
In the chart recorder, you can zoom the curves during a measurement, like in
the Y/t chart, in order to inspect curve sections in detail. Use the magnifying