Measurement Computing DASYLab User Manual - Manual (Page 20)

Chapter 1 Getting Started with DASYLab
1-10 | dasylab.com
2. Double-click the Digital Meter module to open the dialog box.
a.
Click the Copy inputs check box.
b. Click OK. DASYLab creates three outputs in the Digital Meter
module.
3. Drag the Write Data module next to the Digital Meter module until the
digital meter outputs touch the inputs of the Write Data module.
When you release the mouse button, DASYLab automatically connects
the two modules with three data channels. The worksheet looks similar
to Figure 1-7.
4. Start a measurement.
Figure 1-7. The Worksheet Displays and Saves Data
5. Stop the measurement after some time.
Note
You can examine the contents of every data channel
during a measurement. If you click a data channel, DASYLab
displays the data flow of this data channel as a curve in the FIFO
graph of the information block. In the FIFO list, DASYLab