Measurement Computing DASYLab User Manual - Manual (Page 18)

Chapter 1 Getting Started with DASYLab
1-8 | dasylab.com
Inserting Digital Instruments
Complete the following steps to include a digital instrument in the worksheet.
1.
Click the Plus sign next to the module group Display, in the browser.
a.
Select the Digital Meter module and drag and drop the module
into the worksheet.
b. Double-click the Digital Meter module to open the dialog box.
c. Click the Plus button next to the channel bar twice to create two
additional inputs.
d. Click OK. DASYLab creates three inputs in the Digital Meter
module.
2. Double-click the Y/t Chart module to open the dialog box.
a.
Click the Copy inputs check box.
b. Click OK.
DASYLab creates three outputs in the Y/t Chart module which output
the incoming data unchanged.
3. Drag the Digital Meter module to the Y/t Chart module until the chart
outputs touch the digital inputs.
When you release the mouse button, DASYLab automatically connects
the two modules with three data channels.
4. Click Restore All Windows on the function bar to open both display
windows.
5. Arrange the two display windows as shown in figure 1-6.
6. Start a measurement.