Defining measurements, Creating worksheets, Chapter 2 defining measurements – Measurement Computing DASYLab User Manual User Manual
Page 22: Creating worksheets -1
© National Instruments Ireland Resources Limited
|
2-1
2
Defining Measurements
Use a worksheet to describe measurement, control, and display tasks. Select
a module for each function and connect the modules according to the task.
Double-click a module to configure the module. DASYLab transports data in
blocks from module to module. DASYLab does not output a new data block
until the current data block is completely filled with data. The data flow in
the worksheet goes from left to right.
Creating Worksheets
When you start DASYLab, the DASYLab worksheet window opens as
shown in Figure 2-1. You drag modules from the browser, drop the
modules in the workspace, and connect the modules according to the task.
You open measurement settings and start the measurement from the function
bar. During the measurement, the info block displays the data flow of the data
channel you click and the state of the internal buffer.
Figure 2-1.
The Worksheet Window with Browser and Info Block