Lynx Studio LynxTWO/Aurora Interface Kit User Manual
Page 7
10.
Open the Lynx Mixer Adapter Window. Use the RATE SELECT pulldown menu to select a
sample rate that differs from the CURRENT RATE. Choose any sample rate between 44100
and 192000.
11.
Does the SAMPLE RATE on the Aurora change accordingly? If not, double-check the cable
connections and reboot the computer. If the SAMPLE RATE on the Aurora still does not
respond to rate changes in the Lynx Mixer, contact Lynx Technical Support.
12.
Remove the power cord from Aurora and reinstall the Aurora top panel using the eight
screws. Do not over tighten the small screw near the center of the front faceplate as it is
easily damaged.
.
Page 5