Lynx Studio LynxTWO/Aurora Interface Kit - Manual (Page 13)

9.3 Aurora and LynxTWO slave to house clock
Connections required:
Aurora connected to LynxTWO/L22 via LynxTWO/Aurora Interface
Kit. External clock source’s wordclock out connected to Aurora
wordclock in.
Device Settings:
Clock Source: Operating on Internal Clock
Aurora SYNC SOURCE: “EXT”
LynxTWO PREFERRED CLOCK SOURCE: “LStream 1”
Considerations:
In this case, the Aurora would receive house clock through its
wordclock input, and the LynxTWO would receive clock through the
Aurora via the LStream connection. Allow Synchrolock on Aurora to
achieve full lock at system boot or when sample rate has changed
before recording.
Page 11