Leprecon LPC V3 User's Manual - Manual (Page 91)

LPC 48 / 96 Users Manual
Page 91
10.3.2 Creating new labels:
If a label does not exist for the color desired, it’s a simple matter to create a new
label.
• First click on ‘default’ to set the color to white, and all attributes to their default
values.
• Click on the button labeled ‘Edit Values’ at the bottom of the screen.
• Use the on-screen sliders to adjust the color attributes to create new color
labels.
Clicking or moving the sliders close to the center will increment or decrement the
settings by one DMX value. Clicking farther from the middle or moving the slider
further will change the value by 2, 5 or 10.
Values can be entered directly into the attribute boxes using the numeric keypad.
The Up and Down arrows can be used to ‘nudge’ the values shown in the boxes.