Lpc 48 / 96 users manual – Leprecon LPC V3 User's Manual User Manual
Page 34
LPC 48 / 96 Users Manual
Page 34
3.20 Show
Backing up and restoring show data can be achieved using an external flash
device seen in figure 15. The access to this function is in the
Show screen, (See
Figure 16).
Figure 15: Front USB Location
Shows can be Loaded and Saved in the following example.
1.
In the Setup section, select Show.
2.
Insert the USB storage devise.
3.
Select Load Show and the window will open with the information from
your USB storage devise.
4.
Select the desired show and select Open. The show will take a moment to
load.
5.
The show name can be entered or edited with the On Screen keyboard.
Save Show works in a similar way as loading a show.
1.
In the Setup section, select Show.
2.
Insert USB storage devise.