Lpc 48 / 96 users manual – Leprecon LPC V3 User's Manual User Manual
Page 32

LPC 48 / 96 Users Manual
Page 32
3.18 Clear
Clear functions are used to erase selected areas or the entire board memory,
(See Figure 13).
Figure 13: Clear Settings
3.19 Park
Board channels or specific DMX dimmer circuits can be set to a specific value for
the duration of a show or programming session. This is called
Parking. This
can be useful to turn on work lights or turn off an improperly focused fixture.
Parked channels levels are not included in Cues or Submasters that are
recorded while the channels are on.
The interface for Park is shown in figure 14.
Select the
Park tab and the Park screen will appear.
• To park a desk channel use the left dialog box.
• To park a DMX or dimmer channel use the right dialog box