Leprecon LPC V3 User's Manual - Manual (Page 40)

LPC 48 / 96 Users Manual
Page 40
4.4 Setting Channels with Video Interface
If a touch screen is connected, touch a channel selection to capture it. Swiping
across a number of channel numbers will select the entire range. The channel
number and level field will turn green. Use the Level slider located left of the
channel markers to set the channel levels, (see figure 20). Touching or clicking
channels will select and de-select them.
If there is not a touch screen installed, selecting elements with the mouse has the
same effect.
The commands at the bottom of the screen are used to control channel
operation, (See Figure 20).
Touching the Channel command opens a dialog box where the user can
select channels and levels using the keypad.
A group of channels can be set by touching the first channel number, select
the Thru command at the bottom of the screen, and the last channel number.
A string of channel numbers should turn green. Touch the Level Slider and
move to set levels.
The Release command deselects channels, and the green highlight
disappears. New channels can now be selected.
Pressing the Clear All command sets all channels to zero.