Leprecon LPC V3 User's Manual - Manual (Page 21)

LPC 48 / 96 Users Manual
Page 21
The Art Net configuration screen has the following features:
Network: ArtNet usually is used on a network with IP addresses beginning with
2. Updates to the ArtNet specification allows addressing on a network with
addresses beginning with 10. This setting must be consistent with the rest of the
ArtNet gear in the system. Use the drop down box to pick one of the two network
choices.
Subnet: ArtNet data can be transmitted on sixteen different subnets, numbered 0
through 15. Click the arrow to select a specific subnet.
Universe Mapping: The four LPC DMX lines can be assigned to any of sixteen
ArtNet universes supported by each Subnet. Use the drop down box to set each
LPC line to a unique ArtNet universe.
Once settings are complete, don’t forget to save your changes!