Lpc 48 / 96 users manual – Leprecon LPC V3 User's Manual User Manual
Page 61

LPC 48 / 96 Users Manual
Page 61
3.
Add a Title using the on screen keyboard if desired.
5.
Select Save, the message, “Chase Step saved. Pattern: # and Step: # will
display for 5 seconds.
The
Delete… control is used to remove steps from a chase pattern.
Figure 35: Chase Record Screen
7.3 Chase Playback
If chases are associated with a Cue or Submaster, they will automatically start
when the cue or Submaster is used. Fading out the cue, or bringing down the
Submaster fader will stop the chase.
Chases can also be run from the front panel. The Chase fader, tap button, and
pattern button are used to control any of the chase patterns.
Pressing
Pattern will bring up a screen for picking a specific chase.
Bringing up the
Chase fader will fade up that selected chase.
The
Tap button is used to set the rate for an active chase.