1 | system components – Lencore Spectra i.Net: Installation and Operations Manual User Manual
Page 9
section 2
.01-i.LON SmartServer
The Lencore System uses an i.LON®
SmartServer as its head-end equipment to control the networked
system. The i.LON® SmartServer offers exceptional features, solid
construction, and the flexibility to monitor and control the system
from virtually anywhere.
.02-MPI
.03-Jordna Hub
The Jordna Hub provides the ability to split the
system’s signal and distribute it to multiple points. It provides
an input that connects to the i.Net Operating Platform (OP) and
has four outputs that enable the hub to branch to other i.Net OP
locations in separate buildings or facilities. When the need for
wider system coverage and signal distribution is required, Jordna
Hubs can be connected to each other, providing clients with
almost infinite scalability to meet future growth.
2.1 |
system components
Lencore’s Music Page Interface (MPI) replaces all the bulky head-end
equipment that that is associated with music and paging systems.
With the MPI, there is no need for additional cable home runs,
amplifiers, separate equalizers, special switching equipment or
matching vendors for compatible product interfaces. The MPI
allows for the addition of telephone and audio inputs.
5