Lencore Spectra i.Net: Sound Manager - Manual (Page 36)

3. Timer Functions For Sound Masking
3.1. The Timer section applies to Sound Masking only, and is not used for Paging or Music
settings.
1. Click on the Timer tab at the top banner of the screen as shown in Figure 30
below.
Figure 30
3.2. Groups can NOT be modified in the Timer section, Go to “Manually Adjust” to Add/Edit
or Delete any Groups.
3.3. ADDING a Timer Schedule
1. Click on a group to create a Timer Schedule for anyone of the Sound Masking
Groups list as shown in Figure 31 below. You can only have one group per
Timer Schedule.
Figure 31
The information contained herein is proprietary to Lencore Acoustics Corp. and copyright protected. No part of this manual can be copied,
used or distributed without prior authorization from Lencore Acoustics Corp. © Copyright 2010 33
V 1.9