Lencore Spectra i.Net: Sound Manager User Manual
Page 28
2.2.2. Paging Groups
2.2.2.1. ADDING a Paging Group
1. Select the “Paging” tab in the Groups area as shown in Figure 15 below.
Figure 15
2. Click on the “+” symbol in the Groups area to Add a Paging Group as shown
in Figure 16 below. You will be prompted next to enter a group name and
assign a zone number.
Figure 16
The information contained herein is proprietary to Lencore Acoustics Corp. and copyright protected. No part of this manual can be copied,
used or distributed without prior authorization from Lencore Acoustics Corp. © Copyright 2010
25
V 1.9